The Bolex RX is a very reliable reflex spring driven 16mm camera, this particular model was manufactured from 1963 for some years onwards.
Price: $125.00 per day
The Bolex RX5 is a very reliable reflex spring driven 16mm camera, this particular model was manufactured from 1963 for some years onward. The camera has varispeed from 12fps to 64fps including single frame for animation or timelapse work. The camera will automatically load the film. This is a later model in the RX5 range and features the improved 10x viewfinder and the later gate, pressure plate and film loop formers.
Electric Motor Drive and battery available at additional cost.
Takes Standard 16mm, 10x viewfinder, from 12 to 64fps running speeds, single frame, backwind possible, variable shutter angle, C mount turret, round based.
Technical Specifications
Shutter |
180°, 172,8°, 144°, 135°, 90°, 45° |
Dimensions |
8 1/2" x 6" x 3" |
Weight |
Approximately 5 1/2 lbs (without lenses) |
Outer Case |
Highly polished duraluminium body, covered in genuine Morocco leather. Metal parts are chrome-plated |
Film Capacity |
100ft (30m) and 50ft (15m) daylight loading spools of 16mm film |
Threading |
Automatic threading and loop forming. The end of the film is simply placed in a channel leading to the feed sprocket. The release is pressed and the film is then automatically threaded throughout the entire mechanism |
Motor |
Constant speed, spring motor mechanism; governor controlled. Large winding handle folds downward and attaches to camera when not in use. Spring cannot be over-wound. 8:1 external drive shaft permits the attachment of an electric motor |
Turret |
Rotating turret accommodates three interchangeable C mount lenses. The top position allows for critical focusing through a groundglass screen on later versions of this model |
Viewfinder |
Accessory Tri Focal viewfinder gives an exact viewing field for lenses of 3 focal lengths. Later versions of this model had a built-in critical focus viewer with optional cupped eyepiece |
Variable Speed |
8, 16, 24, 32 and 64 frames per second with the ability to change speeds while the camera is running |
Release Button |
Provides for the making of continuous exposures by a finger-tip release on the front of the camera. A side release allows for locked, hands-free running or single frame exposures |
Footage Counter |
Adds and subtracts accurately in forward or reverse motion and automatically returns to zero when film is reloaded into the camera |
Audible Footage Indicator |
A distinct click announces the passing of each 10 inches of film through the gate. This mechanism may be disengaged, if desired, by simply moving a lever |
Frame Counter |
An accessory frame counter could be attached to the motor crank shaft. Two separate counters registered increments of single frames and 50 frames as the film progressed |
Single Frame |
Time lapse and animation is possible by using the side release button or an accessory cable release and adapter; I-T lever allows for timed or instantaneous single exposures |
Manual Rewind |
Clutch disengages spring motor and permits forward movement and backwind without running down the spring; allows for dissolves and superimposition |
Tripod Socket |
3/8" thread |
Please Note: All prices are listed in Australian dollars and exclude insurance, shipping and GST.